Cyclone Pulverizer

Working principle:
Through impact crushing, when the material enters the crushing chamber, it is hit by the high-intensity and high-frequency impact of the crushing tooth plate. The material is quickly broken into powder or slurry by collision and friction, and is discharged through the discharge port under the action of centrifugal force and air flow.

Application scope:
Grain categories: corn, wheat, cassava, soybeans, dry rice, wet rice soaked in water, buckwheat flour, puffed matter, salt, sugar, MSG, spicy strips (leftovers), noodle heads and other food leftovers, crushing, various Grain grinding
Feed: Beans, soy flour, bean cakes, bran, corn cobs, rice husks, chaff, oyster shells, pepper residue, garlic peels, peanut shells, hay, shrimp shells, shells, dried small fish, dried kelp, etc. for grinding
Chemical industry: magnesium chloride, potassium fertilizer, chemical fertilizer, fertilizer, asphalt powder, magnesium oxide, alumina. The raw materials are wet and agglomerated and then crushed and reduced to powder. Various crystals are ground to a fineness of 20-100 mesh.
Industrial: carbon powder, graphite, silica fume, dyes, pigments, lime, gypsum, calcified stone, shale, imitation porcelain plastic, rosin, charcoal, bamboo charcoal, crystal crushing
Seasonings, Chinese herbal medicines: chili, pepper, star anise, cinnamon, thirteen spice powder, hawthorn seeds, dried bark, various Chinese herbal powders, Chinese herbal powders, Panax notoginseng powder
Others: Bamboo powder, incense wood powder, bamboo scraps, feathers, down, plastic shreds, brittle plastics, bamboo scraps, sanding powder

Corn Four-0.8mm

Grain Feed-2mm

Corn Granules-0.8mm

Corn Granules-6mm

Corn Granules-8mm

Multigrain Powder

Corn Flour

Soaked Rice Flour

Chinese Herbal Powder

Paprika Powder

Chemical raw material powder

Technical Parameters

Model	Feed particle size	Discharge particle size	Power	Spindle speed r/min	Capacity Kg/hr	Overall dimensions mm	Weight Kg
C-19	less than or equal to diameter 4cm	20-100mesh	1.5-2.2Kw 220V	6600	100	700350550	36
C-23	less than or equal to 8cm	20-100mesh	3Kw 220V	6600	180	700350550	65
C-26	less than or equal to diameter 4cm	20-100mesh	4Kw 380V	5800	240	330100380	75
C-37	less than or equal to 50mm	0.2-20mm	7.5-11Kw 380V	3600	450	10506801325	145
C-45	less than or equal to 100mm	0.001mm	11-15Kw 380V	3000	650	12009002300	280
C-45W	less than or equal to diameter 5cm	20-120mesh	18.5Kw 380V	2900	1100	11508001425	350
C-55	less than or equal to 8cm	20-100mesh	15-22Kw 380V	3000	1-1.2 T	150010002300	350
C-500	less than or equal to 60mm	20-100mesh	18.5-22Kw 380V	3000	1.3-1.8 T	160010002200	410
C-600	less than or equal to 8cm	20-100 mesh	22-30kw 380V	2800-3000	1.5-2 T	150010001650	515
C-700	less than or equal to 100mm	0.001mm	30-45Kw 380V	3000	2 T	165015001350	1000
C-1000	less than or equal to 1.5cm	20-100mesh	55-90Kw 380V	2500	5 T	350019004500	1500

Body material (optional): cast iron, cast steel, 304 stainless steel, 316 stainless steel

Combinations

Crusher+Feeding hopper

The materials to be crushed are manually added from the position shown in 1 (flat feeding hopper), and then crushed through the main machine of the crusher. After completion, the crushed materials will flow out from the position shown in 2 (discharge port) and collected.
The feeding hoppers include: (flat feeding hopper) and (vertical feeding hopper), which can be selected according to customer needs.

Crusher+Fan+Self-priming pipe+Cyclone

The elbow shown in 1 is a (self-priming pipe), which is used to suck in the materials that need to be crushed when the machine is turned on. To achieve automatic feeding
Shown in 2 is the (fan) on the back of the machine, which is used to generate wind, so that the self-suction pipe 3 can have wind to suck in the material, and the crushed material can be blown into the cyclone dust collector shown in 3 in the form of dust through the wind. In the container.
Shown in 3 is a (cyclone dust collector), also called a (Sakron), which rotates at high speed in a conical barrel and uses centrifugal force to separate the materials and air in the dust, thereby achieving the effect of collecting materials. The top of the Shakron is the air outlet, and the bottom is the discharge port.

Crusher+Feeding hopper+Fan+Cyclone

Referring to the position in Figure 2, the (self-priming pipe) is changed to (vertical feeding hopper) or (flat feeding hopper) for feeding, and the discharging method remains unchanged through the fan and sacron on the back of the machine.
When crushing some materials that cannot be sucked, are difficult to suck, are relatively heavy and have poor fluidity, the self-priming tube cannot function well. At this time, a feeding hopper must be equipped to achieve the best effect. It can be used with a screw elevator or conveyor belt to feed materials into the hopper.